Independent Commissioning Consultancy

Independent Commissioning & MEP Consultancy for Mission‑Critical Infrastructure

Technical assurance, commissioning management, and MEP leadership for data centres, healthcare, and critical facilities. Independent. Technical. Trusted.

Request a Consultation

Capability Statement

ComplianceISO 9001ISO 14001ISO 45001CIBSEBSRIA

Scroll

Technical Governance

Systematic oversight aligned with ISO 9001 quality management principles and IEC/IEEE engineering standards.

Quality Assurance

Independent verification in accordance with CIBSE and BSRIA commissioning guidance frameworks.

Systems Performance

Testing protocols aligned with ASHRAE performance criteria and manufacturer specifications.

Risk Control

Proactive risk management under ISO 45001 health & safety and ISO 14001 environmental frameworks.

Our Expertise

Commissioning & MEP Management Services

End-to-end technical management from design assurance through to operational readiness.

Service 01

Commissioning Management

Delivery aligned with CIBSE, BSRIA, and ASHRAE commissioning standards. From strategy development through IST to operational readiness.

BSRIACIBSEASHRAEIST

Service 02

MEP Project Management

Technical leadership with compliance to IET, IEEE, and IEC electrical standards. ISO 9001 quality management and rigorous programme control.

ISO 9001IET/IEEEIECQA/QC

Service 03

OFCI Management

Owner Furnished Contractor Installed equipment management. Vendor coordination, delivery inspections, benchmarking, and issue tracking for critical assets.

Vendor MgmtInspectionsBenchmarkingClose-Out

Sector Experience

Critical Infrastructure Across Sectors

Deep expertise in facilities where systems performance is non-negotiable.

Data Centres

Hyperscale to colocation facilities

Commercial Offices

HQ buildings and corporate campuses

Healthcare

Hospitals and critical care facilities

View all sectors

35+

Years of Engineering Experience

25+

Mission-Critical Projects Delivered

£500M+

Combined Project Value

Project Experience

Selected Case Studies

Representative projects demonstrating our technical capability across critical sectors.

Data Centre£120M+

Hyperscale Operator

London, UK

Scope

L1–L5 commissioning, QA/QC, IST

Outcome

Zero-defect handover, programme recovery, full compliance with ASHRAE/CIBSE/BSRIA standards.

Healthcare£45M+

NHS Trust

South East England

Scope

MEP project management, commissioning, HAI validation

Outcome

On-time handover of critical care wing. Full HTM/HBN compliance, zero operational defects at go-live.

Residential£80M+

Mixed-Use Developer

Manchester, UK

Scope

MEP coordination, commissioning management, defect resolution

Outcome

Resolved legacy MEP defects across 300+ units. Achieved practical completion on accelerated programme.

Our Commitment

Code of Ethics

Every member of our team upholds these principles, ensuring the highest standards of professional conduct in all engagements.

Industry Standard of Care

Exercise a reasonable industry standard of care in the performance of professional duties.

Trust & Integrity

Perform professional duties with trust, integrity, and honesty.

Public Safety

Hold paramount the health and safety of the public in the performance of professional duties.

Legal Compliance

Work in a manner consistent with all applicable laws and regulations; demonstrate integrity, honesty, and fairness in all activities; and strive for excellence in all matters of ethical conduct.

Conflict Disclosure

Act with integrity in any relationship that involves an employer or client and disclose fully to an affected employer or client any conflicts-of-interest resulting from business affiliations or personal interests.

Accurate Representation

Represent qualifications accurately and honestly.

Competence Assurance

Offer products and services only in areas where competence and expertise will satisfy the client and public need.

Certification Compliance

Comply with and uphold all policies, procedures, guidelines, and requirements of certification programs; use designations as authorized and only in approved manner.

Continuous Improvement

Accept responsibility for maintaining credentials through recertification and continuously uphold the Code of Ethics.

Transparent Reporting

Voluntarily and immediately report any conditions that prohibit fulfillment of duties as set forth in competency requirements.

Ready to Discuss Your Project?

Whether you're at feasibility, design, or construction stage, we provide the technical assurance your project requires.

Start a Discussion Capability Statement

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

"I had the opportunity to work with Ion Raileanu on several high-complexity projects, and I can confidently say he is one of the most skilled and well-balanced professionals I've collaborated with. Ion brings deep technical expertise in commissioning management, including the integration and validation of complex systems. What truly sets Ion apart is not only his technical know-how, but also his empathetic leadership style and calm, decisive management approach, which fosters trust and collaboration across all levels of the project team."

Elena-Izabela Popa, PhD

Senior Professional

"I've had the pleasure of working closely with Ion, a Senior Commissioning Manager who consistently delivers outstanding results on complex projects around the world. He brings a rare combination of deep technical understanding, strong leadership, and a practical, no-nonsense approach that gets things done. He is someone I trust completely to take ownership of a project, work through tough issues, and deliver high-quality results safely and on time."

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

"Ion has been exceptional on every project we've worked on. He's reliable, detail-oriented, and takes full ownership of his commissioning scope. His proactive communication and technical expertise make him a standout. I highly recommend Ion for any critical commissioning work."

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Service

Commissioning Management

Rigorous, independent commissioning management delivered in accordance with CIBSE, BSRIA, and ASHRAE standards. ISO 9001 quality assured.

Overview

Systematic Assurance of System Performance

Commissioning management is the systematic process of verifying that all building systems perform according to the Owner's Project Requirements (OPR) as defined by ASHRAE Guideline 0 and BSRIA commissioning frameworks.

Our commissioning activities are conducted in accordance with CIBSE Commissioning Codes (A, B, C, M, R, W) and BSRIA guidance documents. All processes operate within ISO 9001 quality management and ISO 45001 health & safety frameworks.

Why Independent Commissioning?

Independent verification per BSRIA/CIBSE commissioning guidance
ASHRAE performance criteria compliance verification
ISO 14001 environmental management alignment
ISO 19650 compliant documentation for due diligence
Full compliance with IET, IEEE, and IEC standards

Scope of Services

Commissioning Services

Commissioning Management Planning

Development of comprehensive commissioning programmes in accordance with BSRIA BG 8 guidance and CIBSE Commissioning Codes.

CIBSE/BSRIA-aligned programme development
Resource planning per ISO 9001 principles
ISO 19650 compliant documentation management
Stakeholder coordination protocols

Design Review & Technical Assurance

Independent review of MEP designs against CIBSE guides, ASHRAE standards, and IET/IEEE requirements.

Design compliance with CIBSE/ASHRAE criteria
IEC/IEEE electrical design verification
Testability assessments per BSRIA guidance
Early risk identification and mitigation

Commissioning Strategy Development

Tailored strategies aligned with BSRIA commissioning methodologies and ASHRAE Guideline 0 frameworks.

ASHRAE Guideline 0 commissioning approach
Risk-based prioritisation methodologies
BSRIA BG 8 integration planning
Contingency development

Integrated Systems Testing (IST)

Coordinated testing conducted in accordance with CIBSE Commissioning Codes and ASHRAE performance criteria.

IST aligned with CIBSE Code M
ASHRAE performance-based testing protocols
Cross-system integration verification
Validation against design specifications

Witness Testing & Verification

Independent verification of contractor activities against IET wiring regulations and IEC testing standards.

Factory acceptance testing (FAT)
Site acceptance testing per IET/IEC standards
ASHRAE performance verification
Deficiency tracking and resolution

Handover & Operational Readiness

Ensuring facilities meet ISO 41001 facility management readiness and ISO 50001 energy management requirements.

O&M documentation per BSRIA BG 6/2018
Training coordination and competency verification
Asset data verification (ISO 19650 aligned)
Operational readiness assessments

Our Approach

A Structured Commissioning Process

Planning

BSRIA BG 8 aligned strategy development and ISO 9001 programme establishment.

Pre-Commission

Design review against CIBSE/ASHRAE criteria and IET/IEC standards verification.

Commissioning

Systematic testing per CIBSE Codes and ASHRAE performance validation.

Handover

ISO 19650 documentation completion and ISO 50001 energy readiness verification.

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Service

MEP Project Management

Technical leadership with compliance to IET, IEEE, IEC, and CIBSE standards. ISO 9001 quality management and ISO 45001 safety frameworks.

Overview

Technical Leadership for Complex Installations

MEP systems typically represent 30-50% of total construction cost and require management aligned with international standards. Our approach integrates CIBSE design guidance with IET, IEEE, and IEC electrical standards compliance.

We deliver MEP project management within ISO 9001 quality management frameworks, with environmental controls per ISO 14001 and health & safety governance aligned to ISO 45001 requirements. All energy systems are managed per ISO 50001 principles.

Client Benefits

Single point of accountability with ISO 9001 quality governance
Independent oversight aligned with CIBSE/ASHRAE standards
Risk management per ISO 45001 and ISO 14001 frameworks
Technical reporting suitable for audit and due diligence
Compliance verification against IET/IEEE/IEC standards

Scope of Services

MEP Management Services

MEP Delivery Management

End-to-end management aligned with ISO 9001 quality principles and CIBSE design guidance.

Installation oversight per BSRIA workmanship standards
Technical submittal review against CIBSE/ASHRAE criteria
Design coordination per ISO 19650 BIM protocols
Procurement aligned with ISO 14001 environmental criteria

Contractor Coordination

Interface management conducted within ISO 9001 quality management and ISO 45001 safety frameworks.

Trade interface management per BSRIA guidance
Coordination meeting facilitation
Clash resolution per ISO 19650 protocols
Sequence planning aligned with commissioning requirements

Programme & Cost Control

Proactive management with reporting aligned to ISO 9001 documentation and governance requirements.

Progress monitoring per ISO 9001 KPIs
Milestone tracking and verification
Variation assessment and documentation
Cost forecasting with audit-ready records

Technical Risk Management

Risk management aligned with ISO 45001 health & safety and ISO 14001 environmental frameworks.

Risk register per ISO 31000 principles
Technical audits against IET/IEEE/IEC standards
Issue escalation protocols
ISO-aligned mitigation planning

Interface Management

Managing system interfaces with compliance to IEC, IEEE, and IET electrical standards.

Builder's work coordination
Specialist system interfaces per IEC standards
BMS/controls integration verification
Architectural coordination per CIBSE guidance

Quality Assurance & Compliance

Ensuring installations meet CIBSE, ASHRAE, IET, and IEC standards with ISO 9001 quality assurance.

QA/QC programme per ISO 9001 requirements
Inspection and test plans (ITP) development
IET Wiring Regulations compliance verification
Non-conformance management and resolution

Flexibility

Engagement Models

Full MEP PM

Complete MEP project management from design through handover, acting as the client's technical representative throughout.

Technical Oversight

Independent monitoring and reporting on MEP contractor performance, with escalation support for critical issues.

Targeted Support

Specific expertise for defined project phases or technical challenges, such as coordination or commissioning support.

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Service

OFCI Management

Owner Furnished Contractor Installed equipment management — coordinating vendor deliveries, inspections, and installation oversight for mission-critical assets.

Overview

Protecting Your Equipment Investment

OFCI (Owner Furnished Contractor Installed) equipment represents significant capital investment and critical path risk. Generators, UPS systems, switchgear, chillers, and specialist medical equipment require dedicated management from procurement through commissioning.

Our OFCI management service bridges the gap between owner-procured equipment and installing contractors, ensuring accountability, quality, and programme alignment throughout the installation process.

Why OFCI Management Matters

Eliminates gaps between procurement and installation teams
Protects warranty provisions through proper handling verification
Reduces programme risk from delivery and storage issues
Provides audit-ready documentation for asset management
Ensures contractual clarity on installation responsibilities

Scope of Services

OFCI Management Services

Vendor Coordination

Managing interfaces between owner-procured equipment vendors and installing contractors to ensure seamless integration.

Vendor submittal tracking and review
Delivery schedule coordination
Installation requirement documentation
Warranty and support agreement management

Delivery Inspections

Systematic inspection of owner-furnished equipment upon delivery to site, verifying condition and completeness.

Goods-in inspection protocols
Damage and deficiency reporting
Storage condition verification
Photographic evidence and records

Benchmarking & Performance

Establishing performance baselines and verifying equipment meets specified benchmarks prior to installation.

Factory acceptance test (FAT) witnessing
Performance specification verification
Manufacturer compliance documentation
Pre-installation readiness assessments

Issue Tracking & Close‑Out

Comprehensive tracking of OFCI-related issues from identification through resolution and contractual close-out.

Issue register management
Deficiency resolution tracking
Contractor/vendor accountability logs
Contractual close-out documentation

Equipment Types

Typical OFCI Equipment

Diesel generators

UPS systems

HV/LV switchgear

Transformers

Chillers & CRAHs

AHU units

BMS/controls

Fire suppression

Security systems

Medical equipment

Data hall equipment

Specialist plant

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Sectors

Sector Expertise

Sector-specific expertise with commissioning aligned to CIBSE, BSRIA, ASHRAE, and sector-specific regulatory standards. ISO management system frameworks embedded.

Data Centres

Mission-critical facilities requiring commissioning aligned with Uptime Institute Tier standards and IEEE/IEC electrical verification protocols.

Key Expertise

Critical power verification per IEEE/IEC standards
Cooling system commissioning per ASHRAE TC 9.9
BMS/DCIM integration testing
Uptime Institute Tier certification support
Concurrent maintainability validation

Commercial Offices

Corporate environments with HVAC systems verified against ASHRAE performance criteria and electrical systems per IET Wiring Regulations.

Key Expertise

HVAC commissioning per CIBSE/ASHRAE standards
Lighting controls per CIBSE Guide F
Metering aligned with ISO 50001 requirements
Tenant fit-out coordination
BREEAM/LEED compliance verification

Healthcare

Clinical environments with systems verified against HTM requirements, CIBSE healthcare guidance, and IEC medical electrical standards.

Key Expertise

Critical care commissioning per HTM 03-01
Medical gas verification per HTM 02-01
Ventilation per HTM 03-01 and CIBSE Guide A
Emergency power per IEC 60364-7-710
Environmental monitoring per ISO 14644

Life Sciences

GMP facilities with validation-led commissioning aligned to ISPE guidelines, ISO 14644 cleanroom standards, and ASHRAE environmental criteria.

Key Expertise

Cleanroom commissioning per ISO 14644
Environmental monitoring per ISPE GAMP
Process utilities per ASME BPE standards
IQ/OQ/PQ validation protocols
GMP documentation and compliance

Industrial & Logistics

Large-scale facilities with electrical systems verified per IET/IEEE standards and environmental controls aligned to ISO 14001.

Key Expertise

HVAC commissioning per CIBSE/ASHRAE criteria
High-voltage systems per IEC/IEEE standards
Fire protection per BS EN 12845/NFPA
Process services coordination
Energy verification per ISO 50001

Mixed-Use Developments

Complex developments requiring coordinated commissioning per BSRIA guidance with ISO 19650 information management.

Key Expertise

Multi-system integration per CIBSE Codes
Phased commissioning per BSRIA BG 8
ISO 19650 asset data management
District energy per CIBSE CP1 Heat Networks
Complex handover per BSRIA BG 6

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Independent commissioning authority across 3 data halls
Critical power path verification (2N architecture)
Cooling system commissioning per ASHRAE TC 9.9
BMS/DCIM integration testing
Uptime Institute Tier III certification support

Outcome

Successful Tier III certification achieved on first submission. All critical power and cooling paths verified to design redundancy. Concurrent maintainability validated through controlled failure testing.

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Reference Library

Over 30 years of commissioning management and MEP project management experience for clients who require independent technical assurance on critical projects.

Leadership

Ion Raileanu

Managing Director

Accomplished and purposeful M&E Project Manager and Commissioning Manager with more than 30 years of experience managing mechanical, electrical, BMS, and HVAC projects from conception to completion within multi-cultural environments across the UK, Europe, India, and the Middle East.

Proven history of streamlining commissioning processes through implementing effective strategies on projects valued from £10M to £500M+. Deep expertise in data centre commissioning as per ASHRAE, CIBSE, and BSRIA guides, with the ability to identify complex issues and recommend suitable solutions for continuous process improvement.

Demonstrated expertise in designing solutions and encouraging strategic development of systems and infrastructure, while directing projects and collaborating with all levels of the organisation to deliver world-class facilities. Articulate communicator, skilled in quickly engaging team members, establishing rapport, and developing strong relationships.

Manages and mentors teams of circa 30 multi-disciplined engineers and design technicians, overseeing the full lifecycle of engineering projects from concept, design, fabrication, installation, and commissioning.

Independence

Independent verification and assurance, free from contractor conflicts. Objective advice aligned with ISO 9001 quality principles.

Standards Expertise

Deep expertise in CIBSE, BSRIA, ASHRAE, IET, IEEE, and IEC standards. Senior consultants with chartered engineering credentials.

ISO Quality Assured

Delivery within ISO 9001, ISO 14001, and ISO 45001 management system frameworks. Documentation suitable for audit and due diligence.

Compliance Driven

Systems verified against international standards. Governance frameworks aligned with regulatory and client technical requirements.

Expertise

Core Competencies

Technical Oversight

HV/LV electrical systems & power distribution
HVAC, BMS & building controls integration
Design-for-Manufacture-and-Assembly (DfMA)
Energy-efficient & smart technology adoption
Engineering design review & approval

Project Management

Full lifecycle delivery: concept to handover
Cost control & budget management
Risk assessment & mitigation strategies
Programme management & milestone tracking
Performance metrics & continuous improvement

Compliance & Quality

RAMS & test script management
L1–L5 commissioning documentation
QA/QC audits & inspections
Health & safety standards compliance
Regulatory & statutory authority liaison

Leadership & Engagement

Team management: 30+ multi-disciplined engineers
Client & stakeholder relationship management
Cross-functional & multicultural team coordination
Technical reporting to senior management
Business development & proposal support

Career Highlights

Selected Experience

A track record of delivering commissioning and MEP management on high-profile projects for leading international clients.

2024 – Present

Senior CxA Manager

Tracetech Commissioning – Endeavour DC, EMEA

Leading commissioning management across EMEA data centre portfolio. Managing L1–L5 commissioning documentation, coordinating testing activities, and overseeing multi-trade contractor teams.

2024

Program Commissioning Manager

Fluor Corporation – Microsoft DC, Hyderabad, India

Provided leadership on mega-scale complex commissioning and start-up for Microsoft data centre operations in India. Reported to Senior Director of Commissioning and Start-up.

2023 – 2024

HV Commissioning Manager

H&MV Engineering – Microsoft DC, London

Commissioned 132kV substation for Microsoft data centre in London. Full documentation review, approval, and sign-off of HV systems.

2022 – 2023

Commissioning Manager

Dornan Group / WP3 – Microsoft DC, London

End-to-end commissioning management on Microsoft data centres. Led functional and integrated testing, managed commissioning issues resolution, and coordinated with statutory authorities.

2022

OFCI / QA-QC Project Manager

Ramboll AB – Microsoft DC, Gävle, Sweden

Project managed OFCI packages and quality oversight on Microsoft data centre build. Conducted weekly MEP/OFCI inspections, managed vendor coordination, and led benchmarking processes.

2021 – 2022

QA/QC Commissioning Manager

Jones Engineering Group – NTT DC, London

Led QA/QC team through L1 Red Tag to L3 Blue Tag commissioning stages. Managed quality management system updates, client reporting, and full asset tagging programme.

2021

Lead Electrical Commissioning Engineer

LotusWorks – Amazon Data Centre, Dublin

Commissioned MV switchgear, HV transformers, 2.4MW generators, UPS, LV switchgear, PDCs, PDUs, EPMS, and BMS systems. L2 QA/QC and L3 start-up script writing and deployment.

2020

M&E Commissioning Engineer

HDR | Andrew Reid & Partners – Google Data Centre, Helsinki

ASHRAE L1–L5 commissioning validation. Wrote L4 FPT scripts, verified L2/L3 tags, carried out L4 FPT green tag validation, and prepared systems for L5 IST testing.

2018 – 2019

M&E Commissioning Manager

ANEL Engineering – UCLH Hospital (PBT Phase 4), London

Managed commissioning of energy centre CHP, BMS, electrical systems, AHUs, and public health systems for NHS acute hospital project. Produced commissioning plans and programmes.

2009 – 2011

M&E Contract Supervisor

MITIE – Santander Bank Data Centres, Milton Keynes

Managed upgrades on two live data centres including HV transformers, generators, full BMS upgrade, HV/LV switchgear replacement, chillers, UPS, and ATS systems.

1990 – 2000

Instrumentation Engineer

600MW Power Plant, Romania

Began engineering career with a decade of instrumentation and controls experience on a major power generation facility.

Education

Education & Training

A comprehensive foundation of formal education and continuous professional development.

National Diploma in Electrics & Mechanics

HNC Building Services Engineering Electrical, NVQ Level 5

18th Edition Electrical Installation

Inspection & Testing of Electrical Installation, C&G 2391

Design & Verification of Electrical Installation, NVQ Level 4, C&G 2396

C&G 2078 Safe Handling of Refrigerants

CITB Pipe & Brazing Certificate

CITB F-Gas Certified

Solar Photovoltaic Certificate

Solar Thermal Certificate

Unvented Systems Certification

CSCS Black Card – Managers

Prince2 Project Management Certificate

HSE IOSH Management Certificate

SMSTS Certificate

Asbestos Awareness Certificate

Environmental Technology Certificate

ECS Certificate

L8 Legionella Awareness Certificate

Risk Assessment Awareness Certificate

Supervisory Management Skills

Qualifications & Memberships

Professional Credentials

Internationally recognised qualifications, professional body memberships, and industry certifications ensuring the highest standards of competence and compliance.

Professional Memberships

MCIBSE

Member of the Chartered Institution of Building Services Engineers

MCSA

Member of the Commissioning Specialists Association

MASHRAE

Member of the American Society of Heating, Refrigerating and Air-Conditioning Engineers

MIET

Member of the Institution of Engineering and Technology

Certifications & Qualifications

PMP

Project Management Professional

PMI

PRINCE2

Projects in Controlled Environments

Axelos

IOSH

IOSH Managing Safely Certification

IOSH

Electrical Designer

Electrical Designer Certification

Industry Certified

SMSTS

Site Management Safety Training Scheme

CITB

CSA

Commissioning Specialist Authority

ACG

BREEAM AP

BREEAM Accredited Professional

BRE

CDM

Construction Design & Management

HSE Compliant

ECS/CSCS

Electrotechnical Certification

JIB/CSCS

First Aid

Emergency First Aid at Work

HSE Approved

Electromech Facilities Ltd is fully insured with Hiscox for Public Liability and Professional Indemnity.

Our Approach

How We Work

Understand

We begin by understanding your project requirements, constraints, and risk profile. This informs our approach and ensures our services are targeted appropriately.

Plan

We develop a clear scope of services with defined deliverables, milestones, and resource plans. You know what you're getting and when.

Deliver

We execute with technical rigour and clear communication. Our reporting is concise, issue-focused, and supports your decision-making.

Credentials

Professional Standards

ISO Management Systems

ISO 9001 – Quality Management
ISO 14001 – Environmental Management
ISO 45001 – Health & Safety
ISO 50001 – Energy Management
ISO 19650 – Information Management

Technical Standards

CIBSE Commissioning Codes
BSRIA Commissioning Guidance
ASHRAE Standards & Guidelines
IET Wiring Regulations
IEEE/IEC Electrical Standards

Professional indemnity insurance

CIBSE membership

ACE member practice

Building Safety Act competence

CDM compliance

BREEAM AP qualified

Data centre certifications

CSA compliance capability

Our Values

What We Stand For

Integrity

We provide honest, independent advice without conflicts of interest. Our assessments are objective and technically sound.

Technical Excellence

We apply rigorous engineering standards to every engagement. Mediocrity has no place in critical infrastructure.

Compliance First

Every deliverable meets or exceeds applicable international standards. Compliance is our baseline, not our ceiling.

Client Focus

We protect our clients' interests throughout the project lifecycle. Your success is our primary measure of performance.

Why Choose Us

The Electromech Difference

Unlike large multidisciplinary firms, we focus exclusively on commissioning management and MEP project oversight. This specialism means you get senior-level expertise on every engagement — not a junior team learning on your project.

As an independent consultancy, we have no ties to contractors, suppliers, or equipment manufacturers. Our advice is always in your best interest, and our assessments are free from commercial bias.

We bring the rigour of a Tier 1 consultancy with the agility and responsiveness of a specialist practice. Direct access to senior leadership means faster decisions and consistent quality throughout.

Senior-Led Delivery

Every project is led by a principal consultant with 30+ years of experience — not delegated to junior staff.

Sector Specialist

Deep expertise in data centres, healthcare, and critical infrastructure where commissioning quality directly impacts operational performance.

Fully Independent

No contractor affiliations or equipment supply interests. Our recommendations are always objective and technically justified.

Flexible Engagement

From short-term technical reviews to full project lifecycle support — we scale our involvement to match your needs and budget.

Rapid Mobilisation

Lean structure means we can deploy to site quickly, often within days of instruction, without layers of internal approval.

Request a Capability Statement

For tender submissions or prequalification, we can provide a detailed capability statement with project references and team CVs.

Request Capability Statement

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644

Contact

Start a Technical Discussion

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Enquiry Form

Complete the form below and we'll respond within one business day.

Quick Call

Book a 15‑Minute Consultation

A brief, no-obligation conversation to understand your project and advise on how we can support.

Call Now

Direct Contact

Ion Raileanu

Managing Director

officehr@electromechfacilitiesltd.co.uk

Phone

+44 7973 758644

Ion Raileanu

Standards & Governance

All services delivered within ISO 9001, ISO 14001, and ISO 45001 frameworks.

CIBSEBSRIAASHRAEIETIEEEIECCSA

Testimonials

What People Say

Trusted by senior professionals and project leaders across international infrastructure projects.

Elena-Izabela Popa, PhD

Senior Professional

Armando Grajal Parejo, PMP

Project Manager – Commissioning Manager

John Costakis

CEO at Thermal Works – an ENDEAVOUR company

Speak to a Commissioning Specialist Today

Whether you have an immediate project requirement or wish to discuss future opportunities, we welcome the conversation.

Request a Consultation

officehr@electromechfacilitiesltd.co.uk +44 7973 758644